|
|
seqcount |
Please help by correcting and extending the Wiki pages.
% seqcount "tembl:*" -out tembl.seqcount Reads and counts sequences |
Go to the output files for this example
Reads and counts sequences
Version: EMBOSS:6.4.0.0
Standard (Mandatory) qualifiers:
[-sequence] seqall (Gapped) sequence(s) filename and optional
format, or reference (input USA)
[-outfile] outfile [*.seqcount] Output file name
Additional (Optional) qualifiers: (none)
Advanced (Unprompted) qualifiers: (none)
Associated qualifiers:
"-sequence" associated qualifiers
-sbegin1 integer Start of each sequence to be used
-send1 integer End of each sequence to be used
-sreverse1 boolean Reverse (if DNA)
-sask1 boolean Ask for begin/end/reverse
-snucleotide1 boolean Sequence is nucleotide
-sprotein1 boolean Sequence is protein
-slower1 boolean Make lower case
-supper1 boolean Make upper case
-sformat1 string Input sequence format
-sdbname1 string Database name
-sid1 string Entryname
-ufo1 string UFO features
-fformat1 string Features format
-fopenfile1 string Features file name
"-outfile" associated qualifiers
-odirectory2 string Output directory
General qualifiers:
-auto boolean Turn off prompts
-stdout boolean Write first file to standard output
-filter boolean Read first file from standard input, write
first file to standard output
-options boolean Prompt for standard and additional values
-debug boolean Write debug output to program.dbg
-verbose boolean Report some/full command line options
-help boolean Report command line options and exit. More
information on associated and general
qualifiers can be found with -help -verbose
-warning boolean Report warnings
-error boolean Report errors
-fatal boolean Report fatal errors
-die boolean Report dying program messages
-version boolean Report version number and exit
|
| Qualifier | Type | Description | Allowed values | Default |
|---|---|---|---|---|
| Standard (Mandatory) qualifiers | ||||
| [-sequence] (Parameter 1) |
seqall | (Gapped) sequence(s) filename and optional format, or reference (input USA) | Readable sequence(s) | Required |
| [-outfile] (Parameter 2) |
outfile | Output file name | Output file | <*>.seqcount |
| Additional (Optional) qualifiers | ||||
| (none) | ||||
| Advanced (Unprompted) qualifiers | ||||
| (none) | ||||
| Associated qualifiers | ||||
| "-sequence" associated seqall qualifiers | ||||
| -sbegin1 -sbegin_sequence |
integer | Start of each sequence to be used | Any integer value | 0 |
| -send1 -send_sequence |
integer | End of each sequence to be used | Any integer value | 0 |
| -sreverse1 -sreverse_sequence |
boolean | Reverse (if DNA) | Boolean value Yes/No | N |
| -sask1 -sask_sequence |
boolean | Ask for begin/end/reverse | Boolean value Yes/No | N |
| -snucleotide1 -snucleotide_sequence |
boolean | Sequence is nucleotide | Boolean value Yes/No | N |
| -sprotein1 -sprotein_sequence |
boolean | Sequence is protein | Boolean value Yes/No | N |
| -slower1 -slower_sequence |
boolean | Make lower case | Boolean value Yes/No | N |
| -supper1 -supper_sequence |
boolean | Make upper case | Boolean value Yes/No | N |
| -sformat1 -sformat_sequence |
string | Input sequence format | Any string | |
| -sdbname1 -sdbname_sequence |
string | Database name | Any string | |
| -sid1 -sid_sequence |
string | Entryname | Any string | |
| -ufo1 -ufo_sequence |
string | UFO features | Any string | |
| -fformat1 -fformat_sequence |
string | Features format | Any string | |
| -fopenfile1 -fopenfile_sequence |
string | Features file name | Any string | |
| "-outfile" associated outfile qualifiers | ||||
| -odirectory2 -odirectory_outfile |
string | Output directory | Any string | |
| General qualifiers | ||||
| -auto | boolean | Turn off prompts | Boolean value Yes/No | N |
| -stdout | boolean | Write first file to standard output | Boolean value Yes/No | N |
| -filter | boolean | Read first file from standard input, write first file to standard output | Boolean value Yes/No | N |
| -options | boolean | Prompt for standard and additional values | Boolean value Yes/No | N |
| -debug | boolean | Write debug output to program.dbg | Boolean value Yes/No | N |
| -verbose | boolean | Report some/full command line options | Boolean value Yes/No | Y |
| -help | boolean | Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose | Boolean value Yes/No | N |
| -warning | boolean | Report warnings | Boolean value Yes/No | Y |
| -error | boolean | Report errors | Boolean value Yes/No | Y |
| -fatal | boolean | Report fatal errors | Boolean value Yes/No | Y |
| -die | boolean | Report dying program messages | Boolean value Yes/No | Y |
| -version | boolean | Report version number and exit | Boolean value Yes/No | N |
The input is a standard EMBOSS sequence query (also known as a 'USA').
Major sequence database sources defined as standard in EMBOSS installations include srs:embl, srs:uniprot and ensembl
Data can also be read from sequence output in any supported format written by an EMBOSS or third-party application.
The input format can be specified by using the command-line qualifier -sformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: gff (gff3), gff2, embl (em), genbank (gb, refseq), ddbj, refseqp, pir (nbrf), swissprot (swiss, sw), dasgff and debug.
See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further information on sequence formats.
49 |
| Program name | Description |
|---|---|
| aligncopy | Reads and writes alignments |
| aligncopypair | Reads and writes pairs from alignments |
| biosed | Replace or delete sequence sections |
| codcopy | Copy and reformat a codon usage table |
| cutseq | Removes a section from a sequence |
| degapseq | Removes non-alphabetic (e.g. gap) characters from sequences |
| descseq | Alter the name or description of a sequence |
| entret | Retrieves sequence entries from flatfile databases and files |
| extractalign | Extract regions from a sequence alignment |
| extractfeat | Extract features from sequence(s) |
| extractseq | Extract regions from a sequence |
| featcopy | Reads and writes a feature table |
| featreport | Reads and writes a feature table |
| feattext | Return a feature table original text |
| listor | Write a list file of the logical OR of two sets of sequences |
| makenucseq | Create random nucleotide sequences |
| makeprotseq | Create random protein sequences |
| maskambignuc | Masks all ambiguity characters in nucleotide sequences with N |
| maskambigprot | Masks all ambiguity characters in protein sequences with X |
| maskfeat | Write a sequence with masked features |
| maskseq | Write a sequence with masked regions |
| newseq | Create a sequence file from a typed-in sequence |
| nohtml | Remove mark-up (e.g. HTML tags) from an ASCII text file |
| noreturn | Remove carriage return from ASCII files |
| nospace | Remove whitespace from an ASCII text file |
| notab | Replace tabs with spaces in an ASCII text file |
| notseq | Write to file a subset of an input stream of sequences |
| nthseq | Write to file a single sequence from an input stream of sequences |
| nthseqset | Reads and writes (returns) one set of sequences from many |
| pasteseq | Insert one sequence into another |
| revseq | Reverse and complement a nucleotide sequence |
| seqret | Reads and writes (returns) sequences |
| seqretsetall | Reads and writes (returns) many sets of sequences |
| seqretsplit | Reads sequences and writes them to individual files |
| sizeseq | Sort sequences by size |
| skipredundant | Remove redundant sequences from an input set |
| skipseq | Reads and writes (returns) sequences, skipping first few |
| splitsource | Split sequence(s) into original source sequences |
| splitter | Split sequence(s) into smaller sequences |
| trimest | Remove poly-A tails from nucleotide sequences |
| trimseq | Remove unwanted characters from start and end of sequence(s) |
| trimspace | Remove extra whitespace from an ASCII text file |
| union | Concatenate multiple sequences into a single sequence |
| vectorstrip | Removes vectors from the ends of nucleotide sequence(s) |
| yank | Add a sequence reference (a full USA) to a list file |
Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.