fseqbootall

Wiki

Please help by correcting and extending the Wiki pages.

Function

Description

Algorithm

To carry out a bootstrap (or jackknife, or permutation test) with some method in the package, you may need to use three programs. First, you need to run SEQBOOT to take the original data set and produce a large number of bootstrapped or jackknifed data sets (somewhere between 100 and 1000 is usually adequate). Then you need to find the phylogeny estimate for each of these, using the particular method of interest. For example, if you were using DNAPARS you would first run SEQBOOT and make a file with 100 bootstrapped data sets. Then you would give this file the proper name to have it be the input file for DNAPARS. Running DNAPARS with the M (Multiple Data Sets) menu choice and informing it to expect 100 data sets, you would generate a big output file as well as a treefile with the trees from the 100 data sets. This treefile could be renamed so that it would serve as the input for CONSENSE. When CONSENSE is run the majority rule consensus tree will result, showing the outcome of the analysis.

This may sound tedious, but the run of CONSENSE is fast, and that of SEQBOOT is fairly fast, so that it will not actually take any longer than a run of a single bootstrap program with the same original data and the same number of replicates. This is not very hard and allows bootstrapping or jackknifing on many of the methods in this package. The same steps are necessary with all of them. Doing things this way some of the intermediate files (the tree file from the DNAPARS run, for example) can be used to summarize the results of the bootstrap in other ways than the majority rule consensus method does.

If you are using the Distance Matrix programs, you will have to add one extra step to this, calculating distance matrices from each of the replicate data sets, using DNADIST or GENDIST. So (for example) you would run SEQBOOT, then run DNADIST using the output of SEQBOOT as its input, then run (say) NEIGHBOR using the output of DNADIST as its input, and then run CONSENSE using the tree file from NEIGHBOR as its input.

The resampling methods available are:

• The bootstrap. Bootstrapping was invented by Bradley Efron in 1979, and its use in phylogeny estimation was introduced by me (Felsenstein, 1985b; see also Penny and Hendy, 1985). It involves creating a new data set by sampling N characters randomly with replacement, so that the resulting data set has the same size as the original, but some characters have been left out and others are duplicated. The random variation of the results from analyzing these bootstrapped data sets can be shown statistically to be typical of the variation that you would get from collecting new data sets. The method assumes that the characters evolve independently, an assumption that may not be realistic for many kinds of data.
• The partial bootstrap.. This is the bootstrap where fewer than the full number of characters are sampled. The user is asked for the fraction of characters to be sampled. It is primarily useful in carrying out Zharkikh and Li's (1995) Complete And Partial Bootstrap method, and Shimodaira's (2002) AU method, both of which correct the bias of bootstrap P values.
• Block-bootstrapping. One pattern of departure from indeopendence of character evolution is correlation of evolution in adjacent characters. When this is thought to have occurred, we can correct for it by samopling, not individual characters, but blocks of adjacent characters. This is called a block bootstrap and was introduced by Künsch (1989). If the correlations are believed to extend over some number of characters, you choose a block size, B, that is larger than this, and choose N/B blocks of size B. In its implementation here the block bootstrap "wraps around" at the end of the characters (so that if a block starts in the last B-1 characters, it continues by wrapping around to the first character after it reaches the last character). Note also that if you have a DNA sequence data set of an exon of a coding region, you can ensure that equal numbers of first, second, and third coding positions are sampled by using the block bootstrap with B = 3.
• Partial block-bootstrapping. Similar to partial bootstrapping except sampling blocks rather than single characters.
• Delete-half-jackknifing.. This alternative to the bootstrap involves sampling a random half of the characters, and including them in the data but dropping the others. The resulting data sets are half the size of the original, and no characters are duplicated. The random variation from doing this should be very similar to that obtained from the bootstrap. The method is advocated by Wu (1986). It was mentioned by me in my bootstrapping paper (Felsenstein, 1985b), and has been available for many years in this program as an option. Note that, for the present, block-jackknifing is not available, because I cannot figure out how to do it straightforwardly when the block size is not a divisor of the number of characters.
• Delete-fraction jackknifing. Jackknifing is advocated by Farris et. al. (1996) but as deleting a fraction 1/e (1/2.71828). This retains too many characters and will lead to overconfidence in the resulting groups when there are conflicting characters. However it is made available here as an option, with the user asked to supply the fraction of characters that are to be retained.
• Permuting species within characters. This method of resampling (well, OK, it may not be best to call it resampling) was introduced by Archie (1989) and Faith (1990; see also Faith and Cranston, 1991). It involves permuting the columns of the data matrix separately. This produces data matrices that have the same number and kinds of characters but no taxonomic structure. It is used for different purposes than the bootstrap, as it tests not the variation around an estimated tree but the hypothesis that there is no taxonomic structure in the data: if a statistic such as number of steps is significantly smaller in the actual data than it is in replicates that are permuted, then we can argue that there is some taxonomic structure in the data (though perhaps it might be just the presence of aa pair of sibling species).
• Permuting characters. This simply permutes the order of the characters, the same reordering being applied to all species. For many methods of tree inference this will make no difference to the outcome (unless one has rates of evolution correlated among adjacent sites). It is included as a possible step in carrying out a permutation test of homogeneity of characters (such as the Incongruence Length Difference test).
• Permuting characters separately for each species. This is a method introduced by Steel, Lockhart, and Penny (1993) to permute data so as to destroy all phylogenetic structure, while keeping the base composition of each species the same as before. It shuffles the character order separately for each species.
• Rewriting. This is not a resampling or permutation method: it simply rewrites the data set into a different format. That format can be the PHYLIP format. For molecular sequences and discrete morphological character it can also be the NEXUS format. For molecular sequences one other format is available, a new (and nonstandard) XML format of our own devising. When the PHYLIP format is chosen the data set is coverted between Interleaved and Sequential format. If it was read in as Interleaved sequences, it will be written out as Sequential format, and vice versa. The NEXUS format for molecular sequences is always written as interleaved sequences. The XML format is different from (though similar to) a number of other XML sequence alignment formats. An example will be found below. Here is a table to links to those other XML alignment formats:

  Andrew Rambaut's BEAST XML format	http://evolve.zoo.ox.ac.uk/beast/introXML.html and http://evolve.zoo.ox.ac.uk/beast/referenindex.html	A format for alignments. There is also a format for phylogenies described there.
  MSAML M	http://xml.coverpages.org/msaml-desc-dec.html	Defined by Paul Gordon of University of Calgary. See his big list of molecular biology XML projects.
  BSML	http://www.bsml.org/resources/default.asp	Bioinformatic Sequence Markup Language includes a multiple sequence alignment XML format

Usage

% fseqbootall -seed 3 Bootstrapped sequences algorithm Input (aligned) sequence set: seqboot.dat Phylip seqboot program output file [seqboot.fseqbootall]: bootstrap: true jackknife: false permute: false lockhart: false ild: false justwts: false completed replicate number 10 completed replicate number 20 completed replicate number 30 completed replicate number 40 completed replicate number 50 completed replicate number 60 completed replicate number 70 completed replicate number 80 completed replicate number 90 completed replicate number 100 Output written to file "seqboot.fseqbootall" Done.

Go to the input files for this example
Go to the output files for this example

Command line arguments

Bootstrapped sequences algorithm
Version: EMBOSS:6.4.0.0

   Standard (Mandatory) qualifiers:
  [-infilesequences]   seqset     (Aligned) sequence set filename and optional
                                  format, or reference (input USA)
  [-outfile]           outfile    [*.fseqbootall] Phylip seqboot program
                                  output file

   Additional (Optional) qualifiers (* if not always prompted):
   -categories         properties File of input categories
   -mixfile            properties File of mixtures
   -ancfile            properties File of ancestors
   -weights            properties Weights file
   -factorfile         properties Factors file
   -datatype           menu       [s] Choose the datatype (Values: s
                                  (Molecular sequences); m (Discrete
                                  Morphology); r (Restriction Sites); g (Gene
                                  Frequencies))
   -test               menu       [b] Choose test (Values: b (Bootstrap); j
                                  (Jackknife); c (Permute species for each
                                  character); o (Permute character order); s
                                  (Permute within species); r (Rewrite data))
*  -regular            toggle     [N] Altered sampling fraction
*  -fracsample         float      [100.0] Samples as percentage of sites
                                  (Number from 0.100 to 100.000)
*  -rewriteformat      menu       [p] Output format (Values: p (PHYLIP); n
                                  (NEXUS); x (XML))
*  -seqtype            menu       [d] Output format (Values: d (dna); p
                                  (protein); r (rna))
*  -morphseqtype       menu       [p] Output format (Values: p (PHYLIP); n
                                  (NEXUS))
*  -blocksize          integer    [1] Block size for bootstraping (Integer 1
                                  or more)
*  -reps               integer    [100] How many replicates (Integer 1 or
                                  more)
*  -justweights        menu       [d] Write out datasets or just weights
                                  (Values: d (Datasets); w (Weights))
*  -enzymes            boolean    [N] Is the number of enzymes present in
                                  input file
*  -all                boolean    [N] All alleles present at each locus
*  -seed               integer    [1] Random number seed between 1 and 32767
                                  (must be odd) (Integer from 1 to 32767)
   -printdata          boolean    [N] Print out the data at start of run
*  -[no]dotdiff        boolean    [Y] Use dot-differencing
   -[no]progress       boolean    [Y] Print indications of progress of run

   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-infilesequences" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outfile" associated qualifiers
   -odirectory2        string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit

Qualifier	Type	Description	Allowed values	Default
Standard (Mandatory) qualifiers
[-infilesequences] (Parameter 1)	seqset	(Aligned) sequence set filename and optional format, or reference (input USA)	Readable set of sequences	Required
[-outfile] (Parameter 2)	outfile	Phylip seqboot program output file	Output file	<*>.fseqbootall
Additional (Optional) qualifiers
-categories	properties	File of input categories	Property value(s)
-mixfile	properties	File of mixtures	Property value(s)
-ancfile	properties	File of ancestors	Property value(s)
-weights	properties	Weights file	Property value(s)
-factorfile	properties	Factors file	Property value(s)
-datatype	list	Choose the datatype	s (Molecular sequences) m (Discrete Morphology) r (Restriction Sites) g (Gene Frequencies)	s
-test	list	Choose test	b (Bootstrap) j (Jackknife) c (Permute species for each character) o (Permute character order) s (Permute within species) r (Rewrite data)	b
-regular	toggle	Altered sampling fraction	Toggle value Yes/No	No
-fracsample	float	Samples as percentage of sites	Number from 0.100 to 100.000	100.0
-rewriteformat	list	Output format	p (PHYLIP) n (NEXUS) x (XML)	p
-seqtype	list	Output format	d (dna) p (protein) r (rna)	d
-morphseqtype	list	Output format	p (PHYLIP) n (NEXUS)	p
-blocksize	integer	Block size for bootstraping	Integer 1 or more	1
-reps	integer	How many replicates	Integer 1 or more	100
-justweights	list	Write out datasets or just weights	d (Datasets) w (Weights)	d
-enzymes	boolean	Is the number of enzymes present in input file	Boolean value Yes/No	No
-all	boolean	All alleles present at each locus	Boolean value Yes/No	No
-seed	integer	Random number seed between 1 and 32767 (must be odd)	Integer from 1 to 32767	1
-printdata	boolean	Print out the data at start of run	Boolean value Yes/No	No
-[no]dotdiff	boolean	Use dot-differencing	Boolean value Yes/No	Yes
-[no]progress	boolean	Print indications of progress of run	Boolean value Yes/No	Yes
Advanced (Unprompted) qualifiers
(none)
Associated qualifiers
"-infilesequences" associated seqset qualifiers
-sbegin1 -sbegin_infilesequences	integer	Start of each sequence to be used	Any integer value	0
-send1 -send_infilesequences	integer	End of each sequence to be used	Any integer value	0
-sreverse1 -sreverse_infilesequences	boolean	Reverse (if DNA)	Boolean value Yes/No	N
-sask1 -sask_infilesequences	boolean	Ask for begin/end/reverse	Boolean value Yes/No	N
-snucleotide1 -snucleotide_infilesequences	boolean	Sequence is nucleotide	Boolean value Yes/No	N
-sprotein1 -sprotein_infilesequences	boolean	Sequence is protein	Boolean value Yes/No	N
-slower1 -slower_infilesequences	boolean	Make lower case	Boolean value Yes/No	N
-supper1 -supper_infilesequences	boolean	Make upper case	Boolean value Yes/No	N
-sformat1 -sformat_infilesequences	string	Input sequence format	Any string
-sdbname1 -sdbname_infilesequences	string	Database name	Any string
-sid1 -sid_infilesequences	string	Entryname	Any string
-ufo1 -ufo_infilesequences	string	UFO features	Any string
-fformat1 -fformat_infilesequences	string	Features format	Any string
-fopenfile1 -fopenfile_infilesequences	string	Features file name	Any string
"-outfile" associated outfile qualifiers
-odirectory2 -odirectory_outfile	string	Output directory	Any string
General qualifiers
-auto	boolean	Turn off prompts	Boolean value Yes/No	N
-stdout	boolean	Write first file to standard output	Boolean value Yes/No	N
-filter	boolean	Read first file from standard input, write first file to standard output	Boolean value Yes/No	N
-options	boolean	Prompt for standard and additional values	Boolean value Yes/No	N
-debug	boolean	Write debug output to program.dbg	Boolean value Yes/No	N
-verbose	boolean	Report some/full command line options	Boolean value Yes/No	Y
-help	boolean	Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose	Boolean value Yes/No	N
-warning	boolean	Report warnings	Boolean value Yes/No	Y
-error	boolean	Report errors	Boolean value Yes/No	Y
-fatal	boolean	Report fatal errors	Boolean value Yes/No	Y
-die	boolean	Report dying program messages	Boolean value Yes/No	Y
-version	boolean	Report version number and exit	Boolean value Yes/No	N

Input file format

Input files for usage example

File: seqboot.dat

    5    6
Alpha     AACAAC
Beta      AACCCC
Gamma     ACCAAC
Delta     CCACCA
Epsilon   CCAAAC

Output file format

The Factors option causes the characters to be resampled together. If (say) three adjacent characters all have the same factors characters, so that they all are understood to be recoding one multistate character, they will be resampled together as a group.

The order of species in the data sets in the output file will vary randomly. This is a precaution to help the programs that analyze these data avoid any result which is sensitive to the input order of species from showing up repeatedly and thus appearing to have evidence in its favor.

The numerical options 1 and 2 in the menu also affect the output file. If 1 is chosen (it is off by default) the program will print the original input data set on the output file before the resampled data sets. I cannot actually see why anyone would want to do this. Option 2 toggles the feature (on by default) that prints out up to 20 times during the resampling process a notification that the program has completed a certain number of data sets. Thus if 100 resampled data sets are being produced, every 5 data sets a line is printed saying which data set has just been completed. This option should be turned off if the program is running in background and silence is desirable. At the end of execution the program will always (whatever the setting of option 2) print a couple of lines saying that output has been written to the output file.

Output files for usage example

File: seqboot.fseqbootall

    5     6
Alpha      AAACCA
Beta       AAACCC
Gamma      ACCCCA
Delta      CCCAAC
Epsilon    CCCAAA
    5     6
Alpha      AAACAA
Beta       AAACCC
Gamma      ACCCAA
Delta      CCCACC
Epsilon    CCCAAA
    5     6
Alpha      AAAAAC
Beta       AAACCC
Gamma      AACAAC
Delta      CCCCCA
Epsilon    CCCAAC
    5     6
Alpha      CCCCCA
Beta       CCCCCC
Gamma      CCCCCA
Delta      AAAAAC
Epsilon    AAAAAA
    5     6
Alpha      AAAACC
Beta       AAACCC
Gamma      AACACC
Delta      CCCCAA
Epsilon    CCCACC
    5     6
Alpha      AAAACC
Beta       ACCCCC
Gamma      AAAACC
Delta      CCCCAA
Epsilon    CAAACC
    5     6
Alpha      AACCAA
Beta       AACCCC
Gamma      ACCCAA
Delta      CCAACC
Epsilon    CCAAAA
    5     6
Alpha      AAAACC
Beta       ACCCCC
Gamma      AAAACC
Delta      CCCCAA
Epsilon    CAAACC
    5     6
Alpha      AACACC


  [Part of this file has been deleted for brevity]

Gamma      ACAAAA
Delta      CCCCCC
Epsilon    CCAAAA
    5     6
Alpha      AACAAC
Beta       AACCCC
Gamma      AACAAC
Delta      CCACCA
Epsilon    CCAAAC
    5     6
Alpha      AACAAA
Beta       AACCCC
Gamma      CCCAAA
Delta      CCACCC
Epsilon    CCAAAA
    5     6
Alpha      ACAAAA
Beta       ACCCCC
Gamma      CCAAAA
Delta      CACCCC
Epsilon    CAAAAA
    5     6
Alpha      CAAAAA
Beta       CCCCCC
Gamma      CAAAAA
Delta      ACCCCC
Epsilon    AAAAAA
    5     6
Alpha      CAACCC
Beta       CCCCCC
Gamma      CAACCC
Delta      ACCAAA
Epsilon    AAACCC
    5     6
Alpha      ACAACC
Beta       ACCCCC
Gamma      ACAACC
Delta      CACCAA
Epsilon    CAAACC
    5     6
Alpha      AAAAAA
Beta       AAAAAC
Gamma      ACCCCA
Delta      CCCCCC
Epsilon    CCCCCA
    5     6
Alpha      AACAAC
Beta       AACCCC
Gamma      CCCAAC
Delta      CCACCA
Epsilon    CCAAAC

Data files

Notes

References

Warnings

Diagnostic Error Messages

Exit status

Known bugs

See also

Author(s)

Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.

History

Target users

Comments